Jeep WK Grand Cherokee Badges and Nameplates

By Jeep Experts

Welcome to the jeepExperts.com in-depth desk on the WK Generation Jeep Grand Cherokee badges and nameplates. Did we miss something? Please get in contact with us and inform us about it!

 

Exterior badge elimination

NOTE: Exterior nameplates are connected to physique panels with adhesive tape.

1. Apply a size of masking tape on the physique, parallel to the highest or backside fringe of the nameplate to make use of as a information, if needed. An further piece of tape will also be positioned on the left or proper facet of the badge for extra correct alignment when reinstalling.

2. If temperature is under 21°C (70°F) heat emblem with a warmth lamp or gun. Do not exceed 52°C (120°F) when heating emblem. A hair dryer may additionally be used.

3. Insert a plastic trim stick or a tough wooden wedge behind the logo to separate the adhesive backing from the physique. A brief size of fishing line will also be used.

4. Clean adhesive residue from physique with MOPAR Super Clean solvent or equal.

Installation

1. Remove protecting cowl from adhesive tape on again of emblem.

2. Position emblem correctly on physique.

3. Press emblem firmly to physique with palm of hand.

4. If temperature is under 21°C (70°F) heat emblem with a warmth lamp or gun to guarantee adhesion. Do not exceed 52°C (120°F) when heating emblem.

See also  Jeep WK Grand Cherokee Stock Transmission Specifications

Leave a Comment