Jeep WK Grand Cherokee Overland Power-Folding Mirrors

By Jeep Experts

Welcome to the jeepExperts.com in-depth web page on the WK Generation Jeep Grand Cherokee Overland energy folding mirrors. Did we miss something? Please get in contact with us and inform us about it!

Export fashions of the Grand Cherokee have for a few years featured power-folding mirrors that transfer inward with the contact of a button. Starting with the 2006 Overland fashions Jeep launched this function in North America for the primary time. This featured carried over into the 2007 Overland fashions however was discontinued mid-model yr, round January 2007.

Grand Cherokee WK homeowners should buy the Overland mirrors and related mirror door panel change and set up them into fashions that didn’t include this selection. So far this improve has been confirmed to work on the 2005-2006 Limited and 2006 SRT8 fashions and can more than likely work on 2007-2010 Limited and SRT8 fashions as effectively.

 

2006 WK Overland power-folding heated mirrors
Color / Paint code Part quantity MSRP
Black Clear Coat (PX8) 1BU171X8AB (Left)1BU161X8AB (Right) $610.00$415.00
Bright Silver Metallic Clear Coat (PSB) 1BU171SBAB (Left)1BU161SBAB (Right) $602.00$415.00
Jeep Green Metallic (PGJ) 1BU171GJAB (Left)1BU161GJAB (Right) $572.00$400.00
Light Graystone Pearl (PDA) 1BU171DAAB (Left)1BU161DAAB (Right) $572.00$400.00
Platinum (platinum prime trim, black backside) 1BU171XFAA (Left)1BU161XFAA (Right) $470.00$347.00
Red Rock Crystal Pearl Coat (PEM) 1BU171EMAB (Left)1BU161EMAB (Right) $572.00$400.00
Steel Blue Metallic (PBM) 1BU171BMAB (Left)1BU161BMAB (Right) $610.00$415.00
Power-folding mirror change
Switch, mirror 04602789AA $15.85

 

Mirror removing:

1. To take away the present mirrors the door trim panels have to be eliminated. See Door trim panel removing directions on this web page.

See also  2010 Jeep WK Grand Cherokee Standard Equipment Comparison List

2. Disengage energy mirror harness connector.

3. Remove the froth flag seal protecting the mounting space.

4. Remove the three nuts attaching mirror to door.

5. Carefully separate mirror from door. There is a rubber gasket within the heart that the wires move by, it might assist slightly to push the gasket by from the inside door facet together with your fingers whereas pulling the mirror off from the skin.

Mirror wiring:

1. A pair of wires have to be run from the passenger door mirror harness connector (empty pin slots 4 & 5) over into the driving force’s facet door. This pair, and a pair from the driving force facet mirror connector (empty pin slots 4 & 5) hook into the 2 empty slots (pins 1 & 10) on the brand new mirror change. See wiring diagram beneath.

2. Remove the entrance door sill scuff plate by pulling it upwards, it’s held in place by spring clips.

Door sill scuff plate removing

 

3. Remove the left and proper decrease cowl panels for entry to feed wiring from beneath the sprint into the doorways. The kick panels pull out straight in direction of you, but additionally have to clear the hood launch deal with (drivers facet solely) and weatherstripping. Lift up on the “tail” finish first because it has a plastic information pin that matches into the door sill.

Cowl trim removing, left facet, proper facet

3. The wires may be fed into the door by way of the left and proper kick panels and in by the rubber boot within the door openings. Remove the door audio system for simple entry to tug the wire by the rubber boot and into the door.

See also  Tips on Buying a Used Jeep WK Grand Cherokee SRT8

Wiring diagram for power-folding mirrors

MIRROR OPERATION CAUTION:

If you actuate the facility fold mirror to the shut place or in case you manually fold it together with your arms you MUST use the facility fold mirror perform (use the motor) to deliver the mirror again to the house place. If you manually use your arms to deliver the mirror again to it’s residence place the mirror might be unfastened.

An instance could be: the automobile goes by a automotive wash and the driving force both folds the mirrors in by the facility fold perform or the brushes knock the mirrors to the shut place after which when exiting the wash an attendant manually folds the mirror again.

 

Special due to JeepsUnlimited.com member JTS97Z28 for offering further data on this improve.

 

Leave a Comment