Welcome to the jeepExperts.com in-depth web page on the WK Generation Jeep Grand Cherokee Mopar distant begin kits. Did we miss something? Please get in contact with us and inform us about it!
Mopar has a completely built-in, OEM examined distant begin system that lets you begin your automobile from as far-off as 800 ft with simply the push of a button. Imagine beginning and warming your automobile out of your place of business or house on chilly winter days, or cooling the identical automobile on scorching summer season days. Mopar’s Remote Start system is designed to work along with your Chrysler, Dodge and Jeep automobile and interface seamlessly along with your automobile’s digital safety key.
2005-2007 Grand Cherokee
1A. Remote begin module package (for 2005-2007 Grand Cherokee)
Contains the bottom electronics module for under-dash mounting and a whole fuse package. Use with set up package under. Cannot be used on autos with Mopar’s EVS Security Systems. P/N 82208859AB. MSRP: $70.75
1B. Remote begin set up package (for 2005-2007 Grand Cherokee):
Includes harness, long-range antenna, key transponder interface, software program cartridge, hood tilt swap, two mini one-button keyfobs, set up and working directions and {hardware}. Use with module package above. P/N 82208994AG. MSRP: $210
1C. Remote Start improve, with two-way Start Confirmation – (for 2007 Grand Cherokee)
Take the following step by upgrading Mopar’s Remote Start System with a Two-Way Remote Start System. This system will management the distant beginning of your automobile and offer you each audible and visible suggestions (through a 2-button distant transmitter) when your automobile begins, whereas it’s operating and when it turns off. Two-Way Remote Start can solely be put in on autos geared up with an Automatic Transmission. This system isn’t suitable with Mopar’s EVS Security Systems. Requires buy or current set up of One-Way Remote Start system (82208859AB). Includes two-way DNA module, miniature fob with bi-color LED illumination and automobile discover/panic mode alert tones. P/N 82209985AG. MSRP: $112.00.
2005-2007 Remote Start Kit p/n 82208994 elements
2008-2010 Grand Cherokee (similar as manufacturing)
Remote begin module with set up package (for 2008-2009 Grand Cherokee):
Upgrade your Jeep to the identical elements as a manufacturing facility distant begin with the identical built-in keys as manufacturing. The new keys will must be reduce and programmed to the automobile.
NOTE: DEALER SCAN TOOL REQUIRED FOR ACTIVATION.
2008 fashions: P/N 82211018AC. MSRP: $235.00.
2009 fashions: P/N 82211932. MSRP: $235.00.
2010 fashions: P/N 82212148. MSRP: $235.00
Key fob for 2008-2009 kits
Factory Remote Start System operation
If your automobile is supplied with a distant beginning system, it enable the automobile to be began as much as 328 ft (100 meters) away from the automobile utilizing the distant keyless entry key fob which is a part of the ignition key.
All of the next situations should be met earlier than the engine will distant begin:
- Shift lever in PARK
- Doors closed
- Hood closed
- Liftgate closed
- Hazard swap off
- Brake swap inactive (brake pedal not pressed)
- Ignition key faraway from ignition swap
- Battery at a suitable cost stage
- RKE PANIC button not pressed
Press and launch the REMOTE START button on the RKE transmitter twice, inside 5 seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will begin and the automobile will stay within the Remote Start mode for a 15 minute cycle.
Remote Start button
Once the automobile has began, the engine will run for quarter-hour. The parking lamps will stay illuminated to point that the automobile has distant began and the engine is operating. The lamps will flip off when the ignition is turned to RUN or the distant begin is cancelled.
Remote begin will cancel if any of the next happen:
- If The Engine Stalls Or Rpm Exceeds 2500
- Normal Time Out Run Mode (15 Minutes)
- Customer Moves Ignition Into Run/begin
- Any Vehicle Door Ajar
- Trunk/liftgate Ajar
- Hood Ajar
- Start Counter Reached
- Low Rpm Shutdown
- Key In Ignition
- Brake Pressed
- The Hazard Switch Is Pressed
- Not In Park Or Neutral
- Vehicle Speed High
- VTA Alarm Triggered
- Panic Mode Activated
- Battery Voltage High
- Battery Voltage Low
- Loss Of Battery Voltage
- MIL On
- Low Oil Pressure
- Coolant Temperature High
- Crank No Start
- RKE Off Message
- Vehicle Not Configured
- Hood Switch Not Installed Or Inoperative
- No Automatic Transmission
- Invalid Key
- Ignition SNA (sign not obtainable from different module)
- Ignition Not In Lock
- Vehicle In Shipping Mode
- Vehicle Not Programmed
NOTE:
- If an engine fault is current the automobile will begin after which shut down 10 seconds later.
- The park lamps will activate and stay on throughout Remote Start mode.
- For safety, energy window and energy sunroof operation (if geared up) are disabled when the automobile is within the Remote Start mode.
- The engine may be began two consecutive occasions (two 15 minute cycles) with the RKE transmitter. However, the ignition swap should be cycled to the ON place earlier than you may repeat the beginning sequence for a 3rd cycle.
The automobile may be began remotely as much as a most of two occasions. The automobile can also be allowed a most of 1 failed begin, the place the distant begin sequence was initiated however cancelled earlier than the engine begins to crank. After both of those situations, or if the Vehicle Theft Alarm is alarming, or if the PANIC button was pressed, the automobile should be reset by inserting a sound key into the ignition and shifting it to the RUN place, then again to LOCK.
To Exit Remote Start Mode Without Driving the Vehicle
Press and launch the REMOTE START button one time or enable the engine to run for your entire 15 minute cycle.
NOTE: To keep away from unintentional shutdowns, the system will disable the one time press of the REMOTE START button for 2 seconds after receiving a sound Remote Start request.
To Exit Remote Start Mode and Drive the Vehicle
Before the top of 15 minute cycle, press and launch the UNLOCK button on the RKE transmitter to unlock the doorways and disarm the Vehicle Security Alarm (if geared up). Then, previous to the top of the 15 minute cycle, insert the important thing into the ignition swap and switch the swap to the ON place.
NOTE for 2007 fashions: After the automobile is unlocked, you might have 60 seconds to enter the automobile, insert the important thing into the ignition, and transfer it to the RUN place. Otherwise, the engine will cancel distant begin and routinely flip off.
The ignition swap should be within the ON place with a purpose to drive the automobile.
For autos geared up with the Electronic Vehicle Information Center (EVIC), the message “Insert Key/ Turn To Run” will flash within the EVIC till you insert the important thing. Once inserted, the message “Turn To Run” will flash within the EVIC till you flip the important thing to run.
